Jaltest (JDC569.9) | Curtis 4-pins OBD - 26-pins DB26 Verloopkabel | Hef- en Hijswerktuigen Online product The module adds to your

The module adds to your existing modules

PTO FPTO and RPTO: The front and rear power take-off shafts of the Xylon 500

✕The control units present vary by machine: Not every Robex-7 has a readable engine control module in addition to the MCM

updates appear in the device software and technicians can download and install them through the standard update function

2012 and 2013 series: BF4M 2012

Jaltest (JDC569.9) | Curtis 4-pins OBD - 26-pins DB26 Verloopkabel | Hef- en Hijswerktuigen Online product The module adds to yourThe Jaltest JDC569. 9 is the adapter cable between the 4 pin diagnostic connector from the Curtis power module and the 26 pin DB26 input of the Jaltest Link. On the machine side, the 4 pin connector connects to the Curtis controller, while on the interface side, the cable plugs directly into the DB26 port of the Link; no additional 16 pin diagnostic cable is needed. Curtis doesn't use the same diagnostic connector across all controller series: the